JASPER = Green Choice

Did you know that Remanufacturing is Recycling?  Have you considered how your decision to make a major repair to your vehicle affects our environment? We have researched how much energy JASPER utilizes in the remanufacturing process and compared it with information from the Argonne National Lab, a research center for the U.S. Department of Energy.

By averaging the curb weight of three vehicles: a Mercedes-Benz W126, a Hummer H2 and a Toyota Prius, a determination was made on the average amount of energy required in manufacturing vehicles. Energy usage at JASPER, per drivetrain component, was figured and, on the average, only 1% of the energy is consumed in remanufacturing a drivetrain component in comparison to manufacturing the entire vehicle. In tangible terms, that is an energy savings of nearly six tons of coal or 1008 gallons of crude oil. Rather than replacing their vehicles, our customers, by purchasing JASPER remanufactured engines, transmissions, and differentials saved enough energy in 2007 to power an estimated 598,000 households, or every residence in a city the size of Washington, D.C., for an entire year!

In a still cited 1981 Massachusetts Institute of Technology study on remanufactured automotive components, it was approximated that 85% of the energy exhausted in the original product was preserved in the remanufactured product. Instead of wasting energy in the replacement of raw materials, JASPER cleans and remanufactures the original castings to the specifications of the original equipment manufacturer. In another study at the Fraunhofer Institute in Stuttgart, Germany, it was estimated that annual energy savings by remanufacturing worldwide is equivalent to the electricity generated by eight nuclear power plants or 16,000,000 barrels of crude oil - enough to fill 350 oil tankers.

By purchasing a remanufactured engine, transmission, or differential, everyone can benefit from the conservation of our natural resources.

In addition to remanufacturing, following are a few things JASPER is doing to protect our environment:

  • JASPER has implemented bioremediation as a means to clean the water used throughout our remanufacturing process. This process allows an enzyme to break down contaminates into a form which microbes can consume. By using microbes, we can naturally transform hydrocarbons (oil, fuel and solvents) into carbon dioxide and water.
  • JASPER has numerous dust collectors in place, reducing particulate matter to a microscopic level (2.5 microns) with a 99.9% efficiency rating.
  • Ozone depleting vapors have been reduced 77% by changing our cleaning process. Coal slag or Armex (baking soda) blasting agents have taken the place of many solvents used by our company during the core cleaning process.
  • The majority of solvent-based paints applied to the final product have been replaced with water-based versions. A reduction in VOC’s (Volatile Organic Compounds) and reduced drying time resulted.
  • When drivetrain cores are disassembled, all nonusable metal and aluminum parts (4057 tons annually) are sent out for reclamation.
  • In 2007, JASPER recycled 182 tons of scrap wood material. Instead of sending the wood material to landfills, the material was turned into a reusable compost product.
  • Many of the new parts that go into JASPER products come to us in cardboard packaging. This material amounts to 73 tons recycled annually.
  • Motion detection lighting has been introduced throughout the production facility. Sensors detect movement, which activates the bulbs, illuminating the area. This reduces electricity use and the bulbs are biodegradable.

The remanufacturing process breaks the cycle of raw material harvest & production, greatly reducing the emissions of greenhouse gases. As a recipient of the 2006 Verizon Supplier Excellence Award, JASPER Engines & Transmissions has been recognized as a company with strengths in environmentally safe remanufacturing techniques. Future ecological challenges will be greatly reduced if consumers are driven by environmentally conscientious decisions. By purchasing a JASPER product, not only are you buying the best drivetrain component in the industry, you are contributing to environmental preservation.

_____________________

Westerville Automotive providing top automotive repairs and service in Westerville Ohio for 20+ years with top trained ASE technicians in 2 locations.  From oil changes to transmission repairs, our team will get you on the road and keep yoou traveling safely.  Our goal is your complete customer satisfaction.   Westerville Automotive is a Preferred Jasper Engines & Transmissions Owner Installer with NAPA AutoCare Center backed by exceptional customer services. 

SCHEDULE AN APPOINTMENT TODAY:
Our Main Shop - Westerville South:  5591 Westerville Road (614) 890-0707 |  This email address is being protected from spambots. You need JavaScript enabled to view it. Schedule Online

Our Uptown Shop:  31 East Main Street  |  (614) 890-6700  |  This email address is being protected from spambots. You need JavaScript enabled to view it.  |  Schedule Online      

Westerville Automotive

5591 Westerville Rd
Westerville, OH 43081

location small (614) 890-0707
Email the Shop

Westerville Uptown

31 East Main Street
Westerville, OH 43081

location small (614) 890-6700
Email the Shop

SHOP HOURS

Weekdays:   8:00 AM - 6:00 PM
Saturdays: 9:00 AM - 2:00 PM

Make An Appointment

AngiesList SSA 2018 530x438buy westervilleAAA
ASE Master Technicians in Westerville OH

CMR Easy News Program  |   LIS

WEBSITE CHANGES

JASPER Program, Content, Page Layout, and CMR EasyNews Programming © by JASPERWebsites.com, a CMR, Inc program